You are now visiting the Philips lighting website. A localized version is available for you.
Suggestions
    • Unsurpassed energy-efficient and long-lasting solution

      HF-P 154/155 TL5 HO/PLL III 220-240V IDC
      HF-P 154/155 TL5 HO/PLL III 220-240V IDC
      HF-Performer III for TL5 lamps

      HF-P 154/155 TL5 HO/PLL III 220-240V IDC

      Order code: 913713028266

      Full product code: 872790086348200

    Specifications Show all

    General information
    Application Code
    III
    Type Version
    IDC
    Lamp Type
    TL5/PL-L
    Number of Lamps
    1 piece/unit
    Number of Products on MCB (16A Type B) (Nom)
    28
    Automatic Restart
    Yes
    Operating and electrical
    Input Voltage
    220 to 240 V
    Input Frequency
    50 to 60 Hz
    Operating Frequency (Nom)
    45 kHz
    Ignition Method
    Programmed Start
    Crestfactor (Max)
    1.7
    Power Factor 100% Load (Nom)
    0.99
    Ignition Time (Max)
    0.9 s
    Mains Voltage Performance (AC)
    -8%-+6%
    Mains Voltage Safety (AC)
    -10%-+10%
    Earth Leakage Current (Nom)
    0.5 mA
    Inrush Current Width
    0.25 ms
    Constant Wattage Deviation
    -2%/+2%
    Ballast Factor (Nom)
    1
    Power Losses (Nom)
    4.5 W
    Inrush Current Peak (Max)
    24 A
    Efficiency at full load [%]
    91.86 %
    Wiring
    Connector Type Input Terminals
    WAGO 251 universal connector  [ Suitable for both automatic wiring (ALF and ADS) and manual wiring]
    Cable Capacity Output Wires Mutual (Nom)
    200 pF
    Connector Type Output Terminals
    WAGO 251 universal connector  [ Suitable for both automatic wiring (ALF and ADS) and manual wiring]
    Cable Length Hot Wiring
    0.75 m
    Wire Striplength
    8.0-9.0 mm
    Dual Fixture Master/Slave
    Not applicable  [ Master/Slave oper. not applicable]
    Input Terminal Cross Section
    0.50-1.00 mm²
    Output Terminal Cross Section
    0.50-1.00 mm²
    Cable Capacity Output Wires to Earth (Nom)
    200 pF
    System characteristics
    Rated Ballast-Lamp Power
    54/55 W
    Rated Lamp Power on PL-L
    54/55 W
    System Power on PL-L
    56W@55 W
    Lamp Power on PL-L
    51.5W@55 W
    Power Loss on PL-L
    4.5W@55 W
    Rated Lamp Power on TL5
    54/55 W
    System Power on TL5
    57.5 W@54W; 55.5W@50 W; W
    Lamp Power on TL5
    53 W@54 W
    Power Loss on TL5
    4.5 W@54 W
    Rated Lamp Power on TL5 ECO
    50 W
    System Power on TL5 ECO
    54.5 W
    Lamp Power on TL5 ECO
    51W@50 W
    Power Loss on TL5 ECO
    4.5 W@50 W
    Temperature
    T-Ambient (Max)
    60 °C
    T-Ambient (Min)
    -25 °C
    T-Storage (Range)
    -40 °C to 80 °C
    T-Storage (Max)
    80 °C
    T-Storage (Min)
    -40 °C
    T-Case Lifetime (Nom)
    80 °C
    T-Case Maximum (Max)
    80 °C
    T-Ignition (Max)
    60 °C
    T-Ignition (Min)
    -25 °C
    Mechanical and housing
    Housing
    L360x30x22
    Emergency operation
    Nominal Light Output After 60 Seconds
    100% of EBLF
    Battery Voltage Lamp Ignition
    198-254 V
    Normal Operating Voltage (DC)
    220-240 V
    Battery Voltage Lamp Operation
    176-254
    Battery Voltage Guaranteed Operation
    176-275 V
    Battery Voltage Guaranteed Ignition
    186-275 V
    Emergency Ballast Lumen Factor (EBLF) (Nom)
    100 %
    Nominal Light Output After 5 Seconds
    50% of EBLF
    Approval and application
    Energy Efficiency Index
    A2 BAT
    IP Classification
    IP 20  [ Ingress Protection 20]
    EMI 9 kHz ... 30 MHz
    EN 55015 edition 7.1
    EMI 30 MHz ... 1000 MHz
    -
    Safety Standard
    IEC 61347-2-3
    Performance Standard
    IEC 60929
    Quality Standard
    ISO 9000:2000
    Environmental Standard
    ISO 14001
    Harmonic Current Emission Standard
    IEC 61000-3-2
    EMC Immunity Standard
    IEC 61547
    Vibration Standard
    IEC68-2-6 F c
    Bumps Standard
    IEC 68-2-29 Eb
    Humidity Standard
    EN 61347-2-3 clause 11
    Approval Marks
    CE marking
    ENEC certificate
    VDE-EMV certificate
    Temperature Marking
    Yes
    Emergency Standard
    IEC 60598-2-22
    Hum And Noise Level
    < 30 dB(A)
    Application conditions
    Ambient temperature range
    -25 °C to 60 °C
    Product data
    Full product code
    872790086348200
    Order product name
    HF-P 154/155 TL5 HO/PLL III 220-240V IDC
    EAN/UPC - Product
    8711500998217
    Order code
    913713028266
    Numerator - Quantity Per Pack
    1
    Numerator - Packs per outer box
    12
    Material Nr. (12NC)
    913713028266
    Net Weight (Piece)
    0.252 kg
    Installation Diagrams
    HF-P 154/155 TL5 HO/PLL III 220-240V IDC
    HF-P 154/155 TL5 HO/PLL III 220-240V IDC
    Downloads
    Product Data Sheets
    Visuals

    Recently Viewed

    • Add product
       
    • Add product
       
    • Add product
       
    Add product