You are now visiting the Philips lighting website. A localized version is available for you.

        Product family information

        ActiLume 1-10 V can be connected to the 1-10 V DC control input of an HF-R ballast. ActiLume 1-10 V is calibrated for use in a standard office situation.


        A daylight-regulation/presence-detection device which can easily be fitted in a 1-10 V luminaire
        The sensor can be connected to the ballast directly (only dimming) or in combination with the SwitchBox (dimming and switching)
        Offers easy-to-install energy-saving solutions
        Has the same form fit as the ActiLume DALI & ActiLume MicroLuxSense sensor with cover


        If needed, ActiLume 1-10 V can be adjusted manually, using a rotating diaphragm to adjust the set point
        The sensitivity of the sensor can be changed within a range from 1/3 to 3
        With the rotary control it is possible to select a delay time between 1 and 30 minutes
        In combination with the SwitchBox, up to 3 HFR 254 T5 ballasts can be switched, resulting in extremely low stand-by losses (< 350 mW)
        Personal control via the Touch and Dim functionality on the SwitchBox
        Push-button to activate 100 hours burn-in mode for the lamps


        ActiLume 1-10 V is designed for various indoor applications
        ActiLume 1-10 V is designed for ceiling heights of max. 3.5 m
        Product Data Sheets
        • Add product
        • Add product
        • Add product
        Add product

        Cannot find what you’re looking for?
        Perhaps one of these links might help